8 7c 7a 7d Step 7. Attach the air vent, return and fuel tubes. Attach the high-pressure pump connector, too. (Ensure that the fuel tube to be attached is the new one (which differs from the current one in length)). Step 7a. Fuel tube Step 7b Fix the fuel tube to the harness using the (detached) clip. Step 7c Air vent tube Step7d Return tube Step 8. Fasten the VSP mounting bolts (three detached bolts) by applying 24 to 29N•m of torque Step 9. Attach the delivery pipe by applying 9.8 to 14N•m of torque