0000 - Overall system/tractor F - Setting and calibrating I000979 Fig. 98. I000760 Fig. 99. I000761 Fig. 100. 261 T000808 Version 2 04-09-2009 N OTE : If a new A050 - ECU, basic control unit has been installed, carry out transmission calibration 4001–4010. 8 Calibration code 2403 (Auto-Guide control valve) (calibration only Important: The following preparatory steps must be carried out N OTE :
Calibration procedure from end-of-line program EOL 7.60 or higher possible for tractors with Auto-Guide) Auto-Guide standby button (B) at off (LED off) or par- tial activation (LED flashes) - Warning and fault messages must be confirmed individ- ually Press "ESC" to confirm the warning and fault messages displayed on the A007 instrument panel Press one of the buttons repeatedly until the symbol (A) flashes 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 ..
1001- Press "Return", the first main menu appears in the multiple display Press "Return", the second main menu appears in the multiple display 9. Calibrating Auto-Guide control valve Steering wheel not actuated Seat switch actuated Steering set straight Engine is running Tractor stationary F - Setting and calibrating