Fendt 900 Vario COM III — 13 Calibration code 4003 (travel range selector)

I001008 Fig. 145. I001009 Fig. 146. I003578 Fig. 147. I003583 Fig. 148. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- The centre position is displayed and enabled automati- cally If incorrect values are detected or the conditions are not met, an message appears ERROR If calibration is completed without errors, the screen ap- pears and the new settings are saved. Press "ESC" to confirm the warning and fault messages displayed on the A007 instrument panel If calibration is completed without errors, O.K. appears and the new sensor settings are saved. N OTE :

Settings are only transferred when ignition key has been turned to "0" position. (Wait for at least 15 seconds before switching on the ig- nition again!) If incorrect values are detected or the conditions are not met, an message appears ERROR N OTE : The fault code is displayed from end-of-line pro- gram (EOL) 7.60 onward (Autumn 2007) 0000 - Overall system/tractor F - Setting and calibrating 278 T000390 Version 3 21-04-2009 4003 = calibration code FXX = fault code F - Setting and calibrating