0000 - Overall system/tractor F - Setting and calibrating 279 T000390 Version 3 21-04-2009 F10 F30 F31 F08 F20 F11 F12 F13 F03 Engine speed below 600 rpm F04 Engine speed above 900 rpm F07 B015 bevel pinion sensor faulty F09 B010 engine speed sensor faulty F23 Calibrated values do not match 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 ..
1001- F05 Transmission not in neutral F02 Speed above 0.1 km/h F06 Clutch not depressed F01 Terminated by user Fault code Cause F - Setting and calibrating Fault code Cause F01 Terminated by user F02 Speed above 0.1 km/h F03 Engine speed below 600 rpm F04 Engine speed above 900 rpm F05 Transmission not in neutral F06 Clutch not depressed F07 B015 bevel pinion sensor faulty F08 B014 hydrostatic collecting shaft sensor faulty F09 B010 engine speed sensor faulty F10 Neutral button, driving switch faulty (A039 multifunction armrest) F11 B016 travel range detection sensor faulty F12 Y002 travel range I solenoid valve faulty F13 Y003 travel range II solenoid valve faulty F20 Calibrated values for neutral position incorrect F23 Calibrated values do not match F30 Error while reading from EEPROM (A050 ECU, basic control unit) F31 Error while writing to EEPROM (A050 ECU, basic control unit)