Fendt 900 Vario COM III — 18 Calibrating the heater valve (no code)

I001047 Fig. 196. If calibration is completed without errors, O.K. appears and the new sensor settings are saved. If incorrect values are detected or the conditions are not met, an message appears ERROR 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- N OTE : Settings are only transferred when ignition key has been turned to "0" position. (Wait for at least 15 seconds before switching on the ignition again!) The calibration process is automatic (approx. 30 sec- onds) N OTE :

The display flashes during the calibration process The heater valve stepper motor is opened and closed slowly 0000 - Overall system/tractor F - Setting and calibrating 298 T000407 Version 3 21-04-2009 F - Setting and calibrating