Fendt 900 Vario COM III — 19 Calibrating the speed display (A007 instrument panel and A011 radar sensor)

0000 - Overall system/tractor F - Setting and calibrating I002923 Fig. 197. I002924 Fig. 198. I002925 Fig. 199. If the calibration has run correctly the message OK is displayed and the new tyre circumference and the radar impulses are saved. 299 T001215 Version 1 07-11-2007 19 Calibrating the speed display (A007 instrument panel and A011 radar Position the tractor, e.g. with its front wheels, precisely on the start mark (stop with clutch) If incorrect values are detected or the conditions are not met, an ERROR message appears Preliminary conditions: Accurately measure and mark out a track of 30 m (min.) and 100 m (max.).

Calibrating speed display Transmission signals (actual tyre circumference) "theoretical speed" A011 radar sensor "actual speed" (from EOL 7.60/Nov. 07) Press one of the buttons repeatedly until the symbol (A) flashes Press the "Enter" key, the following screen is displayed. The first digit for the track information flashes. The measured track length for the track information must now be entered. E.g. 100 m Repeatedly press one of the keys repeat- edly until the desired figure shows. E.g. 1 Press "Enter" to confirm. Enter the remain- ing two positions in the same manner. Press the key, the display changes from "START" to "STOP".

Drive off with the tractor and stop with the front wheel on the end marker of the measured distance (stop with clutch). 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- N OTE : We recommend: Choose the longest possible track (100 m ) Carry out the calibration on a dry and level surface The calibration is carried out in the transmission menu After confirming the last digit, "START" will flash. Press "Enter" to confirm. sensor) F - Setting and calibrating