Fendt 900 Vario COM III — 1 Dismantling and reassembling axle drive

I003612 Fig. 9. I003613 Fig. 10. I003614 Fig. 11. I003615 Fig. 12. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Pre-tension the rear axle shaft bearing with the hex screw (10). Remove the planetary carrier (14) once more. Press the sectioned ring (25) out of the rear axle shaft (31) groove Remove shims Withdraw the dowel pin (12) Attach the protective cap X 899.980.157.000 to the rear axle shaft Attach assembly clamps (self made, see picture) to the rear axle shaft (31). Force the rear axle shaft out (31) by knocking on a metal block. N OTE :

Do not turn the rear axle shaft (31)! 1015 - Transmission/axle drive G - Repair 12 T001212 Version 1 07-11-2007 G - Repair