I002893 Fig. 33. I002877 Fig. 34. I002878 Fig. 35. I002879 Fig. 36. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Attach transmission unit to hoist, taking appropriate safety precautions. Set travel range control I-II (arrowed) to neutral (middle) Clean sealing surfaces on transmission housing to re- move oil and seal residue. Set the change lever (arrowed) of the travel range control I-II in the transmission housing to neutral (middle) Where removed:
Fit the circlip and washer to the pinion shaft splines, push the sleeve onto the pinion shaft as far as it will go Locate the flange on the connection shaft and fit connec- tion shaft. Insert the ML drive into the transmission housing. Ensure clearance for all components. Fit both shafts into the transmission housing bores and fit the transmission unit 2 Fit the continuous drive train 1080 - Transmission/drive train G - Repair 20 T000671 Version 2 04-02-2010 G - Repair