I002828 Fig. 49. I002906 Fig. 50. I001829 Fig. 51. I001828 Fig. 52. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Fit the hydraulic hose (enhanced switching pressure sup- ply) Insert the pressure hoses in the transmission housing bores Clean the sealing surfaces of the valve block and the housing, attach a new seal with a small amount of grease to the transmission housing, insert new O-rings and fit the valve block Tighten the securing bolts Torque:
25 Nm 1 High-pressure reverse sensor lines 2 System pressure, rear axle 3 Switching pressure, travel range I 4 Speed governor 5 Switching pressure, travel range II 6 System pressure 7 Control line for high-pressure limiting valves 1080 - Transmission/drive train G - Repair 24 T000671 Version 2 04-02-2010 Fitting the circlips G - Repair