Fendt 900 Vario COM III — 2 Fit the continuous drive train

1080 - Transmission/drive train G - Repair I002900 Fig. 53. I002896 Fig. 54. I002897 Fig. 55. I001826 Fig. 56. 25 T000671 Version 2 04-02-2010 If necessary, fit the new shaft sealing ring and fill 2/3 with grease Fit the actuator shaft N OTE : Coat the threads of the hex. screw with thread- lock compound and tighten to a torque of 25 Nm 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Place new O-rings into the valve housing with a small amount of grease and tighten the securing bolts Torque: 25 Nm Mate the depression in the actuator shaft with the threaded bore.

Fit the emergency actuation unit G - Repair