Fendt 900 Vario COM III — 2 Fit the continuous drive train

I001816 Fig. 65. I002901 Fig. 66. I001815 Fig. 67. I001813 Fig. 68. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Coat the clean sealing surfaces evenly with X903.050.074 sealing compound Carefully raise the transmission housing cover and fit it Pass the bracket of the retaining strap underneath the hy- draulic piping and slide the bracket sideways into position D ANGER : Do not walk or stand under sus- pended loads! 1080 - Transmission/drive train G - Repair Tighten the housing cover bolts Torque:

120 Nm Tighten the bracket bolts 28 T000671 Version 2 04-02-2010 G - Repair