1080 - Transmission/drive train G - Repair I002226 Fig. 80. I002227 Fig. 81. I002250 Fig. 82. 35 T000775 Version 1 07-11-2007 Preparatory work: Drain off transmission oil (approx. 87 l), unscrew the screw plugs on the underside of the trans- mission. Dismantle the 2V5 = purge valve using a socket wrench (SW 22) Only replace the O-rings if they are damaged. Check the position of the support rings. The support rings face to- wards each other. Tighten the 2V5 = purge valve to 250 + 20 Nm, tighten the screw plugs to 100 Nm I MPORTANT : If the purge valve (2V5) was dismantled for inspection, the transmission must be topped up using the external filling station! 919 .. 0101-1000 925 ..
1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- 5 Replacing the purge valve G - Repair