1220 - Transmission / Live PTO G - Repair I003721 Fig. 87. I003722 Fig. 88. I003723 Fig. 89. I003724 Fig. 90. 39 T001262 Version 1 07-11-2007 Turn the shaft (120) approx. 10 times. Attach gauge. Pull back the shaft (120) once and observe the play. Total play = play, shaft (120) pressed in + play, shaft (120) pulled back N OTE : The flange pin has four impulse bores (arrow) for the B020 rear PTO stub shaft sensor 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Turn the shaft (120) approx. 10 times. Attach gauge. Press in the shaft (120) once and observe the play.
Target value: 0.02 mm ... 0.07 mm (play) In the event of deviations, correct using shims (124). Flanged pin splined shaft 6-part 1 3/8" or: Flanged pin involute 21-part 1 3/8" Flanged pin splined shaft 6-part 1 3/4" Flanged pin involute 20-part 1 3/4" Put the flange pin (137) in place. Fit the spacer (132). G - Repair