Fendt 900 Vario COM III — 9 Y095 to Y101 injector valves 1 to 6

2060 - Engine/fuel system A - General I002264 Functional description: Injector valve (injector) Idle state (a) Fuel is delivered from the high-pressure accumulator (rail) to high-pressure connection (13) and flows via inlet restrictor (14) to valve actuation chamber (6) and delivery chamber volume (9). Rail pressure is present in both chambers. The ad- ditional force generated by nozzle spring (7) (50N) prevents the injector opening even when rail pressure is not yet pres- ent. Injector opens - "start of injection" (b) Energising solenoid coil (2) (approx. 20 A) generates an opening force in ignition armature (4) that overcomes the closing force generated by solenoid valve spring (11).

The high current of 20 amps ensures that the injector opens quickly. When the closing force is overcome, valve ball (5) opens the discharge bore (0.26 mm) and the fuel pressure in the valve actu- ation chamber (6) is discharged. The small amount of fuel used to open the injector flows back into the tank via the fuel return pipe. Every time the injector opens, this small amount of fuel flows via the fuel return pipe. After the maximum stroke has been achieved (approx. 50 μm), the current is reduced after 0.3 ms after start of actuation to the retention current of approx. 12 A.

23 T002573 Version 1 31-10-2008 8 Exposed annular surface of the injection noz- zle needle 10 Injection nozzle hole (multihole nozzle) 5 Valve ball 15 Valve piston (control piston) 7 Injection nozzle spring 13 High-pressure connection 6 Valve actuation chamber 16 Injection nozzle needle 9 Chamber volume 11 Solenoid valve spring Item Designation 12 Outlet restrictor 14 Inlet restrictor 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Cutaway views:

Injector valve (injector) A - General Item Designation Item Designation a Idle state 7 Injection nozzle spring b Injector valve (injector) opens 8 Exposed annular surface of the injection noz- zle needle "Start of injection" c Injector valve (injector) closes 9 Chamber volume "End of injection" 10 Injection nozzle hole (multihole nozzle) 1 Fuel return 11 Solenoid valve spring 2 Solenoid coil 12 Outlet restrictor 3 Overstroke spring 13 High-pressure connection 4 Ignition armature 14 Inlet restrictor 5 Valve ball 15 Valve piston (control piston) 6 Valve actuation chamber 16 Injection nozzle needle