Fendt 900 Vario COM III — 9 Y095 to Y101 injector valves 1 to 6

Injector closes - "end of injection" The A051 ECU, engine control unit (EDC 7) switches off the holding current. When the current is less than the switch- off value (approx. 8 A), the solenoid valve closes and injection nozzle needle (16) closes. The fuel volume in the solenoid valve chamber damps the vibration of the ignition armature. The pressure in fuel return (1) and the pressure in the solenoid valve chamber should be 0.3 - 1.0 bar, so as to ensure sufficient damping properties. If the pressure is higher than this, the damping will be too great and can impair the quantity metering. I002265 Fig. 18. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 ..

1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Forces, clearances and fuel quantities on the injector valve (injector) 2060 - Engine/fuel system A - General 24 T002573 Version 1 31-10-2008 A - General