Fendt 900 Vario COM III — 10 Fault code 08.1.00 -

0000 - Overall system/tractor B - Faults 73 05-10-2009 919 .. 0101-1000 925 .. 1001- 919 .. 1001- 928 .. 0101-1000 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- 08.1.FB Y077 [HKH] - Cut-off valve, rear EPC Floating position is not reached Valve moves to neutral and locks 08.1.FA Y077 [HKH] - Cut-off valve, rear EPC Valve actuator deflected too far Valve moves to neutral and locks 08.1.F9 Y077 [HKH] - Cut-off valve, rear EPC Valve actuator not in neutral posi- tion when switched on; frequent cause:

valve actuator mechani- cally jams (pilot control or main actuator) due to contamination in hydraulics area Valve remains deflected when engine is on, valve locks, pilot pressure OFF Fault code DIN brief description Cause Consequences Reference FENDIAS/Note Fault code DIN brief description Cause Consequences Reference FENDIAS/Note 08.1.F9 Y077 [HKH] - Cut-off valve, rear EPC Valve actuator not in neutral posi- tion when switched on; frequent cause:

valve actuator mechani- cally jams (pilot control or main actuator) due to contamination in hydraulics area Valve remains deflected when engine is on, valve locks, pilot pressure OFF 08.1.FA Y077 [HKH] - Cut-off valve, rear EPC Valve actuator deflected too far Valve moves to neutral and locks 08.1.FB Y077 [HKH] - Cut-off valve, rear EPC Floating position is not reached Valve moves to neutral and locks 08.1.FC Y077 [HKH] - Cut-off valve, rear EPC Manual actuation (occurs when a valve is deflected from its neutral position) Valve locked, pilot pres- sure OFF 08.1.FD Y077 [HKH] - Cut-off valve, rear EPC Pilot control actuator jams Valve locked, pilot pres- sure OFF 08.1.FF Y077 [HKH] - Cut-off valve, rear EPC No setpoint message, no configuration message, setpoint message not plausible, configuration message not plausi- ble.

Potentiometer/PWM error Valve moves to neutral and locks