MH6.6 / MH8.6 HYDRAULICS 5-113 Boom check valve with emergency operation capability Fig. 4 Description The check valve (1) serves the purpose of retain- ing the load pressure at the piston side of the boom cylinders without leakage. The load pressure prevailing in the cylinders when the equipment is up is admitted via port B3-Kf to the rod side of the check valve where an opening force is active. At the same time, the load pres- sure is admitted via the orifice in restrictor non- return valve (2) to the spring cavity and closes the check valve assisted by spring force.
During boom lowering, the pilot pressure (5) opens unlocking valve (3) so that the closing pressure from the spring cavity can escape to- wards leakage oil channel (6). When the equip- ment is raised, the pump pressure opens the check valve, with the oil being displaced from the spring cavity via non-return valve (2). Emergency operation In a emergency (boom cannot be lowered), the unblocking valve (3) can be actuated by means of screw (4). When screw (4) is turned in, valve (3) opens the passage to leakage oil channel (6) of the control block. The lowering speed of the equipment depends on the opening cross section in unlocking valve (3). Fig.
5 Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)