Cummins — 4021389

B3.9, B4.5, B5.9 Industrial Lubricating Oil and Filters Section 5 - Maintenance Procedures at 500 Hours or 6 Months Page 5-9 Install Refer to Procedure 018-004 (Cummins/Fleetguard® Filter Specifications) in Section V for oil filter part number(s). Use the correct oil filter. Fill the filter with clean lubricating oil before installation. Apply a light film of lubricating oil to the gasket sealing surface before installing the filter. CAUTION Mechanical overtightening of filter can distort the threads or damage the filter element seal. Install the filter as specified by the filter manufacturer. Clean the sealing surface. Check the oil drain plug threads. Install the drain plug. Torque Value:

Steel Pan 60 N•m [ 44 ft-lb ] Aluminum Pan 30 N•m [ 22 ft-lb ]