Cummins — 4021389

B3.9, B4.5, B5.9 Industrial Cooling System Section 7 - Maintenance Procedures at 2000 Hours or 2 Years Page 7-3 Coolant is toxic. Keep away from children and pets. If not reused, dispose of in accordance with local environmental regulations. WARNING Drain the cooling system by opening the drain valve on the radiator and removing the plug in the bottom of the water inlet. A drain pan with a capacity of 19 liters [5 gal] will be adequate in most applications. Check for damaged hoses and loose or damaged hose clamps. Replace as required. Check the radiator for leaks, damage, and buildup of dirt. Clean and replace as required.

Flush During filling, air must be vented from the engine coolant passages. The air vents through the jiggle pin openings to the top radiator hose and out the fill opening. Additional venting is provided for engines equipped with an aftercooler. Open the petcock during filling. CAUTION For front gear train engines with aftercoolers, open the petcock during filling for additional venting. For front gear train engines without aftercoolers, the air vents through the jiggle pin openings in the thermostat to the top radiator hose and out the fill opening. This provides adequate venting for a fill rate of 19 liters per minute [5 U.S. gallons per minute].