Fuel Filter (Spin-On Type) B3.9, B4.5, B5.9 Industrial Page 5-4 Section 5 - Maintenance Procedures at 500 Hours or 6 Months Fuel Filter (Spin-On Type) Preparatory Steps Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last. Disconnect the batteries. WARNING Drain WARNING Drain the fuel-water separator into a container, and dispose of contents in accordance with local environmental regulations.
If equipped, use the filter drain valve to drain fuel out of the filter for approximately 5 seconds. This will eliminate fuel from running over the top of the filter upon removal. Remove Clean the area around the fuel filter head. Fuel is flammable. Keep all cigarettes, flames, pilot lights, arcing equipment, and switches out of the work area and areas sharing ventilation to reduce the possibility of severe personal injury or death when working on the fuel system. WARNING Remove the fuel filter.