Weichai — Weichai WP12 Marine Diesel Engine Operating Instructions

5.7.9 Arrangement of cylinder head and valve WP12 series marine diesel engine is designed with individual head assembly for each cylin- der. Each cylinder head is designed with two valves; one for inlet and the other for exhaust. The valve arrangement from the front end is as per figure 5.15 (I- Inlet & E- Exhaust) I E 1 2 3 4 5 6 Figure 5.15 5.7.10 Adjustment of valve clearance Correct valve clearance is one of the main factors to balance power adjustment of engine. Valve clearance must be performed by a trained Professional. Firing Order: 1-5-3-6-2-4 Valve clearance: Inlet valve: 0.40mm. Exhaust valve:

0.60 mm Valve clearance should be adjusted on cold engine (the engine body temperature must be lower than 50°C). Clean the engine’s outer surface – rocker cover and surrounding area. Loosen the rocker cover bolt and remove the cover (Refer figure 5.16,5.17 &5.18). Clean the rocker arm with a clean non-flappy cloth. Figure 5.16 Figure 5.17 Figure 5.18 34 I E I E I E I E I E