TIGHTENING TABLE AND TORQUE VALUES FOR MAIN FASTENERS DESCRIPTIONS SPECIFICATIONS (SIZE – GRADE) REQUIREMENTS ALLOWABLE TIMES TO REUSE Main bearing bolt M18X169 - 10.9 140N.m+210° 2 Crankcase secondary bolt M8X 25 - 8.8 M8X210 - 8.8 8N.m+30 2 Cylinder head main bolt M14X185 - 10.9 60N.m+2×120° 3 Cylinder head secondary bolt M12×1.5X195 - 8.8 20+10N.m Seal with Loctite 262 Sealant 3 Cylinder head secondary nut 25N.m+2×120° 3 Crankshaft pulley bolt M12×1.5X75 - 10.9 45N.m+135° 2 Bolt for tensional vibration damper M10X30 - 8.8 15N.m+30° 2 Flywheel bolt M16×1.5X 120-10.9 105N.m+270° 2 Connecting rod bolt M14×1.5X 67.5 - 10.9 115N.m+90° (Manual tightening) 0 80N.m+153° (Automatic tightening) Idler gear bolt pin M12×1.5X90 - 10.9 105N.m 0 Injector clamping bolt M8X50 - 8.8 8N.m+90 3 Camshaft gear bolt M8X30 - 8.8 8N.m+120° 2 Piston cooling injector bolt M10X25 30N.m 0 Exhaust manifold bolt M10X65 15N.m+60° 2 Standard torque table Bolt size Grade Torque value Grade Torque Value Standard M6 bolt 8.8 8 Nm 10.9 13 Nm Standard M8 bolt 8.8 22 Nm 10.9 31 Nm Standard M10 bolt 8.8 39 Nm 10.9 58 Nm Standard M12 bolt 8.8 70 Nm 10.9 100 Nm Table 5.3 40 40