Ditch Witch RT115 Tier 2 — Target Trench (2)

RT115 Tier 2 - DRILLING ATTACHMENT 147 2. Dig an approach trench (1) along the intended bore path. deep enough for pipe to lay flat and enter soil at correct angle 2. Dig a target trench (2) across the anticipated completion point. IMPORTANT: The actual length of the target trench depends on soil conditions and length of pipe sections. Make it deep enough for drill bit to enter slightly above the trench floor. PREPARE JOBSITE AND EQUIPMENT IMPORTANT: The approach trench should be at least: 1. Select a completion point for the drilling project. 2 1. Mark path where you intend to drill.

4" (100 mm) wide 20’ (6 m) long PREPARE JOBSITE AND EQUIPMENT Approach Trench (1) Target Trench (2) p 1 om0529h eps