AS NEEDED Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away. 1. Lay chain on ground with teeth down and pointed toward unit. 4. Disenage parking brake and verify parking brake indicator is off. 6. Back unit up until chain extends past head shaft about 1’ (305 mm). 12. Pull rear end of chain over and about 10" (260 mm) past tail roller. 13. Use hoist to pull front end of chain over head shaft sprocket. 11. Unclamp links. Slowly release cable and lower chain to ground. 10. Engage parking brake and verify parking brake indicator is on. 14. Move chain down boom until chain connector pin and lock key can be installed.
Install connector pin and lock key. 210 RT115 Tier 2 - SERVICE 3. Start tractor. See TRACTOR for start-up procedures. 12. Lay chain on ground with teeth down. 5. Move ground drive control to reverse. 7. Move ground drive control to neutral. 9. Lower boom to horizontal position. 8. Lower backfill blade to ground. 11. Turn ignition switch to STOP. 2. Fasten and adjust seatbelt. p To install chain: