RT115 Tier 2 - CONTROLS 35 STORCODE - indicates a fault has previously occurred and is stored in memory. IMPORTANT: For more information about the diagnostic system and trouble codes procedures see "Troubleshooting" in the Repair Guide. 2. Press and hold the up and down arrows at the same time. A two- line code will display. 3. Press the up or down arrow to scroll through all active or stored codes. To clear active (SRVCCODE) codes: This gauge displays Tier 2 engine data parameters and diagnostic trouble codes. The two types of trouble codes are: SRVCCODE - an active code indicating that a fault is occurring now. 1.
Press the up or down arrow to scroll through the gauge parameters until SRVCCODE or STORCODE is displayed. 2. Turn ignition switch back on. 1. Turn ignition switch off. WORK POSITION DESCRIPTIONS Diagnostic Gauge p To display codes: