Ditch Witch RT115 Tier 2 — WORK POSITION DESCRIPTIONS

WORK POSITION DESCRIPTIONS 3. Immediately press and hold the down arrow until the display reads Send DM3 . 2. Press and hold the up and down arrows at the same time until display reads ****** (approximately 8 seconds). IMPORTANT: For more information about the diagnostic system and trouble codes see "Tier 2 System Overview" in SERVICE . 36 RT115 Tier 2 - CONTROLS 4. Turn ignition switch to STOP, then back on. To clear stored (STORCODE) codes: 1. Turn ignition switch on, engine off. p