John Deere 326D, 328D, 332D — Engagement and Monitor Unit Operation

Operation—Operator’s Station Engagement and Monitor Unit Operation The engagement and monitor unit (EMU) can be used to display vital operating information, hours, diagnostic trouble codes, diagnostics, and to configure units of measure. It can also be used to lock the machine using an anti-theft security system. When the EMU powers up, the display initially reads “TMC by John Deere” for 1.5 seconds before showing the machine model and speeds for 3 seconds. If the anti-theft system has not been enabled or is not active, the display will default to the run-time screen. If the anti-theft system is enabled and unlocked, the display will default to the run-time screen.

If the anti-theft system is enabled on the machine, the user will be prompted to enter their code. See Anti-Theft Security System in this section for more information. information, see Creep Mode Operation—If Equipped. (Section 2-2.) Codes Menu The Codes Menu displays any diagnostic trouble codes (DTCs) that may be present in the machine. The Codes Menu displays both machine and engine DTCs. For more information, see Reading Diagnostic Trouble Codes in this section. Monitor Menu The Monitor Menu allows operator to choose language and units format for their monitor. Job Timer Menu The Job Timer Menu is a hour meter that can be reset. To reset Job Timer:

- Press SELECT button at Job Timer menu. - Press SELECT button at Reset Time. Auto Idle Menu The Auto Idle Menu allows the operator to enable or disable auto idle feature. For more information, see Auto Idle Operation. (Section 2-2.) Anti-Theft Menu—if equipped See Anti-Theft Security System Operation in this section, for further information. Run Data Items The Run Data Items are the default display when the EMU is powered up. The Run Data Items may also be displayed by cycling through the menu items by pressing the NEXT button, or by pressing MENU button at any time while in a submenu. Pressing SELECT button while viewing a Run Data Item will scroll through all the Run Data Items:

Hours Volts Job Timer Hydraulic Oil Temperature Engine Coolant Temperature Engine RPM Anti-Theft Security System The optionally-enabled anti-theft security system within the EMU provides a basic level of machine theft protection. When the anti-theft security system is enabled, the machine can be unlocked and locked with the use of either a 3-digit or 5-digit security code (depending on how the system is configured.) This security code, along with the machine key switch, is necessary to start and run the engine. When locked, the anti-theft security system prevents the engine from starting by disabling the fuel shutoff solenoid (Y1).

If “CHECK SERVICE CODES” appears in the EMU display, press SELECT button to return to the Run Data Items. “CHECK SERVICE CODES” will appear for any hydraulic, park brake, or auto shutdown diagnostic trouble codes. If possible, move machine to a safe location before checking the diagnostic trouble codes. See Reading Diagnostic Trouble Codes in this section. If MENU button is pressed during the run-time display, screen will advance to Main Menu. At any other time, the MENU button will go to last-selected run-time screen. If BACK button is pressed during the run-time display, screen will return to the previous run-time screen.

At any other time, pressing BACK button will return to previous display screen. If NEXT button is pressed during the run-time display, screen will advance to the next run-time screen. At any other time, pressing NEXT button will scroll through menu items. If SELECT button is pressed during the run-time display, screen will advance to the next run-time screen. At any other time, pressing SELECT button will advance to next display screen. Boom and Bucket Rate Menu—if equipped The Boom and Bucket Rate Menu allows the operator to select one of three boom and bucket speed rate settings. For more information, see Boom and Bucket Speed Settings—If Equipped.

(Section 2-2.) Creep Limit Menu—if equipped The Creep Limit Menu allows operator to set creep speed limit when equipped and engaged. For more There are three levels of security within the anti-theft security system: Operator, Owner, and Master. The Operator level of security provides three different security codes that can be used by machine operators. The Owner level of security is designed for the owner or equipment manager. This security level is primarily to be used as a safeguard in the event an Operator code is forgotten or unknown, and the owner wishes to change or replace that security code. After entering a valid Owner security code, the owner can: Lock and unlock the machine.

Change the Owner security code. Change/reset an Operator security code. Enable/disable the auto lock feature. The Master level of security is the highest security level and is used to enable or disable the anti-theft security system. A Master security code can be obtained for a machine by an owner by contacting their John Deere dealer. The dealer will need the current engine hour meter reading and the machine's serial number to generate a new Master security code. Continued on next page OUT4001,0000503 -19-11APR11-1/2 2-1-6 071713 PN=37