Operation—Operator’s Station Gauge and Indicator Light Functions 1—Engagement and Monitor Unit (EMU) Display: Displays vital operating information, hours, diagnostic trouble codes, diagnostics, and to configure units of measure. 11—Engine Low Oil Pressure Indicator: Red indicator will light when engine oil pressure is too low. 12—Hydraulic Oil Temperature Indicator: Red indicator will light when hydraulic oil temperature is too high. 2—Fuel Gauge: Indicates amount of fuel in fuel tank. 3—Engine Coolant Temperature Gauge: Indicates engine coolant temperature. 13—Low Alternator or Battery Voltage Indicator: Amber indicator will light when alternator output is low or battery voltage is low.
4—Interlocking Seat Bar Switch Indicator: Red indicator will light when interlocking seat bar is in the raised position. 14—Engine Air Filter Restriction Indicator: Amber indicator will light when air filter elements are restricted. 15—Hydraulic Oil Filter Restriction Indicator: Amber indicator will light when hydraulic filter element is restricted. 5—Seat Belt Switch Indicator: Red indicator will light when interlocking seat bar is in the raised position and for 5 seconds after the interlocking seat bar is lowered to remind operator that seat belt is not fastened. 16—Creep Mode Indicator: Amber indicator will light when machine is in creep mode. 6—Cab Door Switch Indicator:
Red indicator will light when cab door is open. 17—Hydraulic High Flow Indicator: Amber indicator will light when hydraulic high flow is activated. 7—Hydraulics OFF Indicator: Red indicator will light when hydraulics are disabled. 18—MENU Button: Press button to scroll through menu options on the engagement and monitor unit. 8—Park Brake Indicator: Red indicator will light when park brake is engaged. 19—BACK Button: Press button to return to previous menu options. 9—Two Speed Indicator: Amber indicator will light when two speed shift is in high range. 20—SELECT Button: Press button to select a menu or an item under a menu. 10—STOP Indicator:
Red indicator will light when machine should be shut down. 21—NEXT Button: Press button to move forward through menu options. OUT4001,000050B -19-29OCT09-1/1 Auto Shutdown With Alarm The machine is equipped with automatic shutdown to prevent machine damage. Engine coolant temperature gauge will indicate full hot, the alarm will sound, STOP indicator will flash, and the engagement and monitor unit (EMU) will shut the engine down after 5 seconds when engine coolant temperature is too high. The engine can be restarted and will run for 30 seconds before it will shut down again.
Oil pressure indicator will light, the alarm will sound, STOP indicator will flash, and the EMU will shut the engine down after 5 seconds when engine oil pressure is too low. The engine can be restarted and will run for 30 seconds before it will shut down again. Hydraulic oil temperature indicator will light, the alarm will sound, STOP indicator will flash, and the EMU will shut the engine down after 5 minutes when hydraulic oil temperature is too high. The engine can be restarted and will run for 30 seconds before it will shut down again. OUT4001,000050C -19-28OCT09-1/1 2-1-12 071713 PN=43