Operation—Operator’s Station Interlocking Seat Bar Interlocking seat bar (1) must be lowered after sitting in the operator's seat in order for hydraulic and travel functions to operate. TX1066761A —UN—23OCT09 Adjusting the Interlocking Seat Bar 1. Loosen lock nut (2) on right side of the interlocking seat bar. 2. Turn adjustable stop (3) clockwise to adjust seat bar lower. Turn adjustable stop counterclockwise to adjust seat bar higher. 3. Tighten lock nut when finished with adjustment. Interlocking Seat Bar 4. Repeat procedure on left side of the interlocking seat bar to match.
1— Interlocking Seat Bar 2— Lock Nut 3— Adjustable Stop TX1119802 —UN—07AUG12 Locking Seat Bar Adjustment OUT4001,000050D -19-27MAR13-1/1 Cab Door—If Equipped If machine is equipped with a cab door, the cab door must be closed in order to enable boom and bucket functions. Entering and Exiting the Cab TX1066866A —UN—27OCT09 When entering the cab, pull handle (1) outward and open the door. Use handholds for assistance. When exiting the cab, ensure engine is OFF and park brake is engaged. Raise interlocking seat bar. Hold on to bar (2) and push button (3) up with thumb or palm of hand. Swing door open and exit the cab safely using handholds.
View Shown From Outside the Cab 1— Handle 2— Bar 3— Button TX1066865A —UN—27OCT09 View Shown From Inside the Cab Continued on next page OUT4001,000050E -19-25MAR10-1/4 2-1-13 071713 PN=44