Operation—Operating the Machine Engine Speed Control There are two ways to control engine speed: Engine speed control dial (1) Engine speed control pedal (2) All machines will have both the engine speed control dial and engine speed control pedal, unless machine is equipped with hydraulic hand and foot controls, then it will only have the engine speed control dial. TX1124955 —UN—30OCT12 NOTE: The engine control unit (ECU) will default engine speed to slow idle on engine startup regardless of engine speed control dial position. Move engine speed control dial to slow idle position and then increase the setting to the desired speed to get the engine speed to increase.
1— Engine Speed Control Dial 2— Engine Speed Control Pedal TX1067049A —UN—29OCT09 OUT4001,0000526 -19-30OCT12-1/1 Stopping the Engine 1. Move steering control levers (manual machines) or joysticks (EH machines) to neutral position to stop machine. 3. Lower boom completely to ground. If boom is to remain in raised position, use boom lock. 4. Engage park brake. 2. Move auxiliary hydraulic controls to neutral position. 5. Turn engine speed control dial to slow idle position. CAUTION: Prevent possible injury from unexpected boom movement. Never exit machine with boom raised unless boom is resting on boom lock. 6. Turn key switch to OFF position. 7. Raise interlocking seat bar. 8.
Release seat belt. OUT4001,0000527 -19-10NOV09-1/1 2-2-5 071713 PN=57