John Deere 326D, 328D, 332D — Steering—EH Controls

Operation—Operating the Machine Hands Only Machines 2 The right control lever (2) controls the bucket: Pivot control lever left to roll back bucket. Pivot control lever right to dump bucket. Bucket will move faster the farther the control lever is moved. TX1067302 —UN—04NOV09 2— Right Control Lever Right Control Lever TX1067118 —UN—04NOV09 Right Control Lever Operation—Hands Only Machine OUT4001,000052E -19-10NOV09-2/2 Steering—EH Controls 1 CAUTION: Avoid possible injury from unexpected machine movement. If EH machine is equipped with performance package, be aware that there are two control patterns available. Always verify control response before operating machine.

TX1067217 —UN—04NOV09 Steering on EH machine will use an ISO pattern, unless the optional performance package is ordered that includes the ability to switch from ISO pattern to H pattern depending on operator preference. EH Machine To steer machine using ISO pattern: ISO Pattern NOTE: The left joystick (1) controls left and right drive. 1— Left Joystick Move left joystick in the direction of desired travel. Slowly return left joystick to neutral position to stop. Continued on next page OUT4001,000052B -19-11APR11-1/2 2-2-12 071713 PN=64