Operation—Operating the Machine EH Machine With Performance Package—if equipped 1 2 If EH machine is equipped with performance package, steering control can be easily switched between ISO pattern or H pattern for desired operator preference. NOTE: The active pattern—ISO Pattern Selected or H Pattern Selected—will be displayed on engagement and monitor unit (EMU) at machine startup and anytime the pattern is changed. TX1067110 —UN—03NOV09 Press upper half of pattern select switch (3) for H pattern. Press bottom half of pattern select switch for ISO pattern. To steer machine using H pattern: Optional H Pattern NOTE:
The left joystick (1) controls left drive and the right joystick (2) controls right drive. Press upper half of pattern select switch for H pattern. Push both joysticks forward at the same time to go forward. Pull both joysticks back at the same time to go backward. Push one joystick forward and pull the other joystick back at the same time to make a short turn. Slowly return joysticks to neutral position to stop. TX1067227A —UN—03NOV09 1— Left Joystick 2— Right Joystick 3— Pattern Select Switch Pattern Select Switch OUT4001,000052B -19-11APR11-2/2 2-2-13 071713 PN=65