John Deere 326D, 328D, 332D — Engine Oil and Filter Service Intervals—326D

Maintenance—Machine Diesel Engine Oil—326D Use oil viscosity based on the expected air temperature range during the period between oil changes. 50˚C 122˚F John Deere Plus-50™II is the recommended engine oil. 40˚C 104˚F SAE 15W-40 SAE 10W-40 30˚C 86˚F Extended service intervals may apply when John Deere Plus-50 II engine oil is used. Refer to the engine oil drain interval table and consult your John Deere dealer for more information. SAE 10W-30 20˚C 68˚F SAE 0W-40 SAE 5W-30 10˚C 50˚F If John Deere Plus-50 II engine oil is not available, engine oil meeting one or more of the following may be used:

API Service Category CJ-4 ACEA Oil Sequence E9 ACEA Oil Sequence E6 32˚F -10˚C 14˚F TX1050046 —UN—09AUG10 -20˚C -4˚F DO NOT use engine oil containing more than 1.0% sulfated ash, 0.12% phosphorus, or 0.4% sulfur. -30˚C -22˚F -40˚C -40˚F Multi-viscosity diesel engine oils are preferred. Oil Viscosities for Air Temperature Ranges Diesel fuel quality and fuel sulfur content must comply with all existing emissions regulations for the area in which the engine operates. IMPORTANT: Use only ultra low sulfur diesel (ULSD) fuel with a maximum sulfur content of 15 mg/kg (15 ppm). Plus-50 is a trademark of Deere & Company MB60223,0000237 -19-16SEP11-1/1 3-1-7 071713 PN=87