. OPERATION TROUBLESHOOTING Problem Main causes Remedy Lack of hydraulic oil Add oil to specified level. For details, see EVERY 250 HOURS SERVICE Check Set to FREE position blade rises too slowly or dose not rise at all (or blade tilts too slowly) Defective hydraulic pump Work equipment lock lever is at LOCK position Lack of hydraulic oil Add oil to specified level. For details, see EVERY 250 HOURS SERVICE Check Set to FREE position Ripper moves too slowly, does not move Defective hydraulic pump Work equipment lock lever is at LOCK position Insufficient force of ripper Leakage from piping ( Tighten) 3 - 151