Komatsu — ADJUST IDLER CLEARANCE

. MAINTENANCE SERVICE PROCEDURE REMARK 4 - 31 ADJUST IDLER CLEARAN The i dler moves forward worn. become As t hey b ecome worn, the re is side play in th e idler , or th e idler turns at an angle, causing the track to come off or resulting in uneven wear, so adjust as follows ressure when this ADJUSTING IN SIDEWAYS DI 1. Drive the machine for 8 to 12 m (24.4 to 3 6.6 ft) on flat ground, then measure clearan ce A (4 places: left, right, i nside outside) between the track fra me and side guide ( 2.

If clearance A is more than 4 mm (0.158 remove bolt (1), then t ake out shim, an d adjust to that t he cl earance on one side is les s than 0.5 to 1 m m (0.020 to 0.039 i There are two types of sh (thicknes s: 0.5 mm (0.02 i n) and 1.0 mm (0.0 4 in)).