Komatsu — CHECK DOOR LOCK STRIKER

. MAINTENANCE SERVICE PROCEDURE CHECK DOOR LATCH WARNING may result in breakage of the hinge or door lock. 4 - 40 LUBRICATE DOOR HIN If the door makes a sq ueaking noise when it is op ened or closed, spray lubricant in thro ugh the split in the hinge bu If the bushing is worn, moves off suddenly, and this may lead to serious injury or death. Before checking door latc h, stop the engine and set the p arking brake lever securely to the LOCK po sition. Check Hold the door open-lo cked, and check that there is still grease inside the latch. If the amount of grease is low or t here is no more grease, coat the insid e of the latch with grease fro m portion ( 1).

REMARK If there is no more g rease inside the latch, the movement will If become poor because of dust inside the latch, and the handle may b e stiff when opening the door. CHECK DOOR LOCK S TRIKER or lock striker exceeds 0.5 mm (0.02 in), If the wear of the do replace the striker. If it is used at it is, the play will in crease and this