Komatsu — CHANGE OIL IN POWER TRAIN CASE, WASH STRAINERS (POWER TRAIN PUMP STRAINER, SCAVENGING PUMP STRAINER)

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 3) Lower cover (2) slowly and open it. (The right side of the cover has a hinge.) The strainer can be seen at portion P at the top. part. 4 - 57 4. Remove drain plug (P2) in the strainer c over, an d drain t he oil (approx. 4 liters (1. 06 US gal)) collected inside t he pipin 5. Loosen mounting remove cover (6). strainer, 6. 7. Remove spring (7) Remove any dirt s , then remove straine tuck to strainer (8), diesel oil or flushing of the case at the s 8. Loosen mounting then remove cover 9. Remove strainer (1 10. Remove any dirt st uck to strainer (11), t hen wa sh it in cl ean diesel oil or flushing oil .

Wash the removed parts and the inside of th e case at the same t 11. Install the strainers 12. Replace the power train filter element. For details, see "R EPLACE POWER T RAIN OI L FILTE R ELEMENT (PAGE 4-55)" 13. Refill the specified quantity of oil throug h oil fille 14. After filling with oil, check that the oil is at the s For details, see " CASE, ADD OIL ( If the spring or stra iner are damaged, re place th em with a new