Komatsu — EVERY 250 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK OIL LEVEL IN TANDEM DRIVE CASE, ADD OIL WARNING CHECK OIL LEVEL IN CIRCLE REVERSE GEAR CASE, ADD OIL WARNING 4 - 52 The parts and oil ar e at high temperature immediately a fter the engine i s stopped, and may cause burns . Wait for the temperature t o go do wn before s tarting t he work . 1. Sto p the engine and leave f or a t least 5 minutes 2. Rem ove plug (G) and check tha t the oi l level i s near t he of th e plug hole. 3. If th e oil level is correct, install p lug (G 4. If th e oil level is l ow, add oil through o il filler port (F) The parts and oil ar e at high temperature immediately a fter the engine i s stopped, and may cause burns .

Wait for the temperature t o go do wn before s tarting t he work 1. Sto p the engine and leave f or a t least 5 minutes . 2. Rem ove plug (G ) an d chec k th at the oil leak s slowl 3. If th e oil level is l ow, add oil through o il filler port (F) NOTICE If the oil level is too hig h, th e pressure i nside t he blade rotatio n gear c ase wi ll become high when the oil temperature rises, and this will cause leakage of oi l. REMARK There m ay be wear particles in the oil, bu t there is no p roblem using the