John Deere 6059T — John Deere 6059T User Manual

ARMY TM 9-2815-256-24 AIR FORCE TO 38G1-96-2 MARINE CORPS TM 2815-24/5 FIGURE 3-33. Growler Test b. Set multimeter for ohms and touch one probe to a commutator segment and other one to armature core, refer to FIGURE 3-34. There should be no continuity. If there is continuity, armature is grounded. Replace armature if grounded. FIGURE 3-34. Testing for Grounded Windings c. Set multimeter for ohms and touch probes to two segments, refer to FIGURE 3-35. There should be continuity at any point. If there is no continuity, winding is open circuited. Replace the armature if open circuited. FIGURE 3-35. Checking for Open Circuit Windings d.

Set multimeter for ohms and touch one probe to positive brush holder plate and other one to the holder plate, refer to FIGURE 3-36. There should be no continuity. If there is continuity, replace brush holder. 3-47