Hold Switch OPERATION Use the hold switch (15) to fix the speed range in automatic transmission. Press the switch on the side of the lift arm control lever knob. The transmission is fixed in the speed range displayed on shift indicator (A) on the machine monitor and shift hold pilot lamp (B) illuminates. If the switch is pressed again, the HOLD condition is cancelled and the display goes out. Use this switch to set the desired speed range when carrying out operations such as traveling uphill, traveling downhill, driving in reverse, or grading.
Remark When canceling the shift hold, operate the directional lever or gearshift lever, or operate the transmission shift mode selector switch to MANUAL. It is also possible to cancel the shift hold by turning the starting switch OFF. Front Wiper Switch Turn rotary switch (E) of the front wiper switch (16) to operate the front wiper. If pushbutton (F) is pressed, washer liquid sprays out onto the front glass while the button is being pressed. It is possible to check the position of the switch in display window (G). Position (A): (OFF) Stop Position (B): (INT) Intermittent wiper Position (C): Low-speed wiper Position (D): High-speed wiper WA430-6 2-51