Switching from Reverse Rotation to Normal Rotation OPERATION The fan will switch from reverse rotation to normal rotation if both of the following conditions are fulfilled. If neither of the conditions are fulfilled, the fan direction will not change. Conditions: When the cooling fan automatic reverse rotation switch is set to any position other than portion (a) when the fan is rotating in reverse, and the hydraulic oil temperature has gone above 50°C (122°F) (the indicator on the hydraulic oil temperature gauge is in the green range).
When the continuous time for fan automatic reverse rotation has passed and the hydraulic oil temperature has gone above 50°C (122°F) (the indicator on the hydraulic oil temperature gauge is in the green range). If the direction is switched, the cooling fan reverse rotation pilot lamp on the machine monitor will change in this manner: Lighted up flashing OFF. If the direction is not switched, the cooling fan reverse rotation pilot lamp on the machine monitor will change from being illuminated to flashing and will continue to flash. Torque Converter Lockup Switch The torque converter lockup switch (24) controls the torque converter lockup function.
For further information about the torque converter, see: “Torque Converter Oil Temperature Caution Lamp” on page 2-19 “Torque Converter Lockup Pilot Light” on page 2-27 “TORQUE CONVERTER LOCKUP” on page 5-17 WA430-6 2-57