Komatsu — Gearshift Lever

Gearshift Lever OPERATION The gearshift lever (1) changes the speed range of the transmission. Manual Shift This machine has a 4-FORWARD, 4-REVERSE speed transmission. Place the gearshift lever in a suitable position to obtain the desired speed range. 1st and 2nd speeds are used for working. 3rd and 4th speeds are used for traveling. When the gearshift lever stopper is being used, it is impossible to shift to 3rd or 4th. Disengage the gearshift lever stopper before trying to shift gear. Position (a): 1st Position (b): 2nd Position (c): 3rd Position (d): 4th Remark The lever length can be set to three levels (A), (B) or (C). For adjustment, consult your Komatsu distributor.

The lever is installed to position (B) when delivered. Automatic Shift Automatic gear shifting can be carried out in the 2nd through 4th speed range of the four forward and reverse speeds, depending on the travel conditions. Position (a): 1st Position (b): 2nd Position (c): 3rd Position (d): 4th The range of speeds during automatic gear shifting is determined by the position of the gearshift lever as shown in the following table. WA430-6 2-59 Gear Shift Lever Positions Speed Range 2nd 2nd 3rd 2nd 3rd 4th 2nd 3rd 4th