Komatsu — Directional Lever

OPERATION Remark The 1st position for the gearshift lever fixes the transmission in 1st. There is no automatic shifting of the transmission. When shifting down from 2nd to 1st, press the kickdown switch on the lift arm control lever. If the transmission is in auto-shift and the travel speed is below 10.5 km/h (6.5 mph) in any speed range when traveling in either forward or in reverse, the kickdown switch is actuated and it is possible to shift down to 1st. This makes it easy to carry out load- and-carry operations. If the travel speed is more than 10.5 km/h (6.5 mph) in auto-shift, each time the kickdown switch is pressed, the transmission shifts down one range.

(If the gear shift lever is at F4, the transmission will shift down F4 F3 F2; if it is at F3, the transmission will shift down F3 F2.) To set to the desired speed range when traveling uphill or downhill, or when carrying out grading: When fixing the speed range: Press the HOLD switch on the lift arm control lever. The speed range is fixed at the speed range displayed on the transmission indicator on the machine monitor. When shifting up or down from set speed range: Shift gear with the gearshift lever. Remark When the transmission has been shifted down from 2nd to 1st with the kickdown switch, it will shift up from 1st to 2nd when the travel speed increases.

Directional Lever Use the directional lever (2) to change the machine’s travel direction between forward and reverse. When starting the engine, if the directional lever is not at the N position, the engine will not start. In this case, the central warning lamp will light up and the buzzer will sound. Position (a): FORWARD Position (N): NEUTRAL Position (b): REVERSE 2-60 WA430-6