Komatsu — Work Equipment Lock Lever

Remark The lever length can be set to two levels, position (A) or (B). For adjustment, consult your Komatsu distributor. The lever is installed to position (A) when delivered. OPERATION Gearshift Lever Stopper The gearshift lever stopper (3) prevents the gearshift lever from entering the 3rd or 4th positions when working. Position (a): Stopper actuated. Position (b): Stopper released. Work Equipment Lock Lever Before leaving the operator’s seat, set the work equipment lock lever securely to the LOCK position. If the work equipment lock lever is not at the LOCK position and the work equipment control lever (A) is touched by mistake, it may cause serious personal injury.

If the work equipment lock lever is not set securely to LOCK position (L), the work equipment may move and cause serious personal injury. Check that the lever is at the position shown in the graphic. When operating the work equipment lock lever, be careful not to touch the work equipment control lever (A). When operating the work equipment lock lever, check that work equipment control lever (A) is at the HOLD position. The work equipment lock lever (4) is a device to lock the work equipment control levers and prevent operation of the work equipment. Pull the work equipment lock lever towards the center of the machine to set it to LOCK position (L).

Remark This lever shuts off the hydraulic circuit for the work equipment. If the lever is at LOCK position (L), the work equipment does not move even if work equipment control lever (A) is operated. WA430-6 2-61