Komatsu — Lift Arm Control Lever

OPERATION Bucket Control Lever The bucket control lever (5) operates the bucket. Position (a): TILT When the bucket control lever is pulled further from the TILT position, the lever stops in this position until the bucket reaches the preset position of the positioner, and the lever is returned to the HOLD position. Position (b): HOLD The bucket is stopped and held in position. Position (c): DUMP Lift Arm Control Lever The lift arm control lever (6) is used to operate the lift arm. Position (a):

RAISE When the lift arm control lever is pulled further from the RAISE position, the lever stops in this position until the lift arm reaches the preset position of the kickout, and the lever is returned to the HOLD position. Position (b): HOLD The lift arm is kept in the same position. Position (c): LOWER Position (d): FLOAT The lift arm moves freely under external force. Remark Do not use the FLOAT position when lowering the bucket. Use the FLOAT position when leveling, see “Leveling Operations” on page 2-123. 2-62 WA430-6