Brake Pedals OPERATION When traveling downhill, always use the right brake pedal. Use the braking force of the engine together with the brake. Do not use the brake pedal excessively. If the brake is used too frequently, the brake will overheat. If this happens, the brakes will not work and may lead to a serious accident. Do not put your foot on the brake pedal unless necessary. The brake pedals (7) operate the brakes. Right and Left Brake Pedals The right brake pedal operates the wheel brakes. Use the right brake pedal for normal braking operations.
When the transmission cutoff switch is at the ON position, the brakes are applied and the transmission is set to the neutral position at the same time. When the transmission cutoff switch is at the OFF position, the brakes are applied but the transmission is not returned to neutral. Remark When using the brake and accelerator together to reduce the machine travel speed or to stop the machine while carrying out operations, set the transmission cutoff switch to the ON position and use the brake pedal. Accelerator Pedal The accelerator pedal (8) controls the engine speed and output. The engine speed can be freely controlled between low idling and full speed. WA430-6 2-63