Komatsu — Fuel Tank Filler Port Cap

Frame Lock Bar OPERATION Always set the frame lock bar to the LOCK position when transporting or lifting the machine, or when carrying out maintenance. If the machine is transported or lifted when the frame lock bar is not locking the frame, the machine may suddenly articulate. If the machine articulates, it may cause serious personal injury to people in the surrounding area. Make sure that the frame lock bar is set to the FREE (F) position for travel operations. If it is not removed, the steering wheel cannot be used for steering. This may lead to serious damage or injury. The frame lock bar is a device used to lock the front and rear frames so that the machine does not articulate.

(L) position: LOCK Front and rear frames are locked and machine cannot articulate. Set to this position when carrying out inspection and maintenance. (F) position: FREE Set to this position for normal operation. Locking Caps This machine is equipped with caps with locks for the fuel tank filler port and hydraulic tank filler port. Use the starting switch key when opening or closing the cap. Fuel Tank Filler Port Cap Opening the Cap 1. Insert the key into the key slot. 2. Turn the key clockwise; align the key groove with mark (1) on the cap; then open the cap. Position (A): OPEN Position (B): LOCK Locking the Cap 1. Screw the cap into place until it is tight. 2.

Insert the key in the key slot until the shoulder contacts the keyhole. If the key is not inserted fully into the cap and is turned, the key may break. 3. Turn the key to LOCK position (B), then remove the key. WA430-6 2-65