Komatsu — Fire Extinguisher (if equipped)

OPERATION Cab Wiper Preventing Wiper Arm Bracket Damage Remark When angling the wiper arm (1) to the front, check that the wiper blade is hanging free. If, when angling the wiper arm (1) to the front, the wiper arm is angled with the wiper blade (2) locked to the arm (the bottom of the blade is caught on the arm), abnormal force is brought to bear on the mounting bracket. This force may break the bracket. Dust Indicator The dust indicator (1) is located inside the engine side cover on the right side of the chassis. If the air cleaner is clogged, the air cleaner clogging caution lamp on the machine monitor illuminates to inform the operator that the air cleaner needs to be cleaned.

After cleaning, press the reset button to cancel the lamp. For details about cleaning the dust indicator, see “Clean, Replace Air Cleaner Element” on page 3-28. Fire Extinguisher (if equipped) A fire extinguisher may be located inside the operator’s cab. The directions are marked on the nameplate affixed to the fire extinguisher. You should be prepared to use the extinguisher. Read the instructions carefully and understand them before you encounter an emergency situation where it is necessary to use the extinguisher. 2-72 WA430-6