Komatsu — Fuses

ELECTRICAL OPERATION Power Outlet Remark There are two power sources: 12V (if equipped) and 24V. Check the voltage of the electrical equipment and select the appropriate power source. Mistaken use, such as using 24V as the power source for 12V equipment, will cause failure of the equipment. When using the electric power source, do not install any equipment which exceeds the maximum amperage. When cigarette lighter (1) is removed, the lighter socket can be used as a 24V power source. Maximum amperage: . . . . . . . . . . . . . . . . . . . . . . . . . . . 9A (216W) Electric power source (2) (if equipped) can be used as a 12V power source. Maximum current:. . . . . . . . . . . . . . . . . . . .

. . . . . . . . . 10A (120W) Fuses Remark Before replacing a fuse, be sure to turn off the starting switch. The fuses protect the electrical equipment and wiring from burning out. Replace the fuse if ANY of the following conditions occur: The fuse is corroded. You can see white powder near the fuse. The fuse is loose in the fuse holder. Remark Replace the fuse with another of the same capacity. The fuses are inside the rear console box. Loosen knob (1) at two places and remove cover (2). The fuse boxes are designated A and B. WA430-6 2-73