Komatsu — Check Coolant Level, Add Coolant

Check Coolant Level, Add Coolant OPERATION Do not open the radiator cap unless necessary. Wait for the engine to cool down before checking the coolant in the subtank. The coolant remains at high temperature and the radiator is under high internal pressure immediately after the engine has stopped. If the cap is removed to check the coolant level in this condition, there is a hazard of burns. Wait for the temperature to go down and then turn the cap slowly to release the pressure before removing it. When adding coolant, use the step and handrail on your machine to support yourself securely. 1. Open cover (1) of the platform on the right side of the machine. 2.

Check that the coolant level is in the range between the FULL and LOW marks on radiator subtank (2) If the coolant level is low, add coolant through the coolant filter of subtank (2) to the FULL level. 3. After adding coolant, tighten the cap securely. 4. If subtank (2) is empty, check for coolant leakage, then check the coolant level in the radiator. If the coolant level is low, add coolant to the radiator, then add coolant to subtank (2). If the volume of coolant added is more than usual, check for possible leakage. Confirm that there is no oil in the coolant. WA430-6 2-81